Electrix Repeater Manual de usuario descargar pdf (Pagina 35)

SELECTING LOOPS VIA MIDI

Repeater uses the MIDI Bank control change messages for remote selection of loops via MIDI. They work as a MSB/LSB

pair. MSB stands for Most Significant Bit and LSB: Least Significant bit - think of it as chapter and verse. MIDI CCs

are limited to 127 values. Using MSB/LSB allows us to utilize banks of 127 to access all of Repeaters 1000+ loops.

Use the Bank Select MSB CC#0 to Select the Bank as follows:

- Bank 0 = Internal 1-16 - Bank 5= External 513-640

- Bank 1= External 1-128 - Bank 6= External 641-768

- Bank 2= External 129-256 - Bank 7= External 769-896

- Bank 3= External 257-384 - Bank 8= External 897-999

- Bank 4= External 385-512

Use the Loop Select LSB to select the loop within the bank. i.e. to select External 387, send CC#0 (Loop select MSB)

at 4, and CC #32 (Loop select LSB) at 3.

There are some other ways of moving between loops too. Try these for size:

¥ Loop select up/down via PC or CC messages.

¥ Direct loop select PC messages.

M I D I CONTROL CHANGE

All of Repeater's functions are remotely accessible via MIDI.

Almost all controls on Repeater generate MIDI Control Change (CC) messages from the MIDI output. These CC's all

occur on the currently selected Repeater MIDI channel. Additionally, all front panel controls respond to CC and PC

messages received on the currently selected MIDI channel. The MIDI CC and PC messages supported are given in the

Repeater MIDI Specifications Table:

USING A MIDI FOOT CONTROLLER WITH REPEAT E R

By lining up a MIDI foot controller with some of the above mentioned parameters it is possible to control a Repeater

entirely with oneÕs feet. May we make a few suggestions:

English... 35

MIDI

Name Default PC CC Value ranges and meaning

Track 1 Record Select 0 6 80 0 - 127 64-127 (active)

Track 2 Record Select 0 7 81 0 - 127 64-127 (active)

Track 3 Record Select 0 8 82 0 - 127 64-127 (active)

Track 4 Record Select 0 9 83 0 - 127 64-127 (active)

Track 1 Level/Mute 100 16 16 0 - 127 see Appendix G

Track 2 Level/Mute 100 17 17 0 - 127 see Appendix G

Track 3 Level/Mute 100 18 18 0 - 127 see Appendix G

Track 4 Level/Mute 100 19 19 0 - 127 see Appendix G

Overdub Feedback Level 90 N/A 11 0 - 127 (no feedback - 100% feedback)

Reverse forward 10 84 0 - 127 0-63 (forward), 64-127 (reverse)

Play 0 20 85 0 - 127 64-127 (Press)

Record 0 3 86 0 - 127 64-127 (Press)

Stop 0 21 87 0 - 127 64-127 (Press)

Undo 0 1 89 0-63 (off) 64-127 (Undo) Momentary

Loop Multiply 0 0 102 0 - 127 64-127 (Press)

FX Insert 0 11 103 0 - 16 As per Appendix E

Tap Tempo 0 12 68 0 - 127 64-127 (Press)

Loop Select Up 0 4 96 0 - 127 64-127 (Action)

Loop Select Down 0 5 97 0 - 127 64-127 (Action)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Comentarios a estos manuales

Sin comentarios

Electrix Repeater Manual de usuario Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos musicales Electrix Repeater