Electrix Tweaker Traktor Reference Manual de usuario descargar pdf (Pagina 17)

3. Traktor Pro 2 Mapping Details

8 The volume faders become pitch faders. Moving the fader on either channel automatically dis-

ables beat sync on that deck. Passing the center while holding Shift will reset the pitch to zero

(in case the TWEAKER’s fader position is dierent from the pitch fader position in Traktor).

8 Turning the top encoder scrolls through the pitch fader ranges.

8 Pushing it resets the range to 8%. TIP: You can display the pitch fader range in the deck display

using the Deck Layout preferences.

8 Turning the middle encoder adjusts the crossfader curve (right channel only).

8 Pushing the middle encoder auto-crossfades.

8 Turning the bottom encoder ne-tunes the pitch (only if Sync is o).

8 Pushing the bottom encoder toggles crossfader assign on and o.

3.3 Grid

The left half of the button grid controls deck-A and the right half controls deck-B.

Hot Cues 1-8

Pressing an empty cell stores a cue point. Holding shift while pressing a saved cue point deletes it.

Each cue point type has its own color:

8 Empty Cell: White

8 Grid Marker: Blue

8 Load Marker: Cyan

8 Cue Point: Magenta

8 Loop: Green

FX Presets

There are 4 presets per eects unit. Presets were created using eects combinations. They can be

used as-is, or as a starting point to manipulate with the pads and/or encoders.

8 Pressing a preset once selects the 3 eects.

8 Pressing it again sets the parameters.

8 Holding shift accesses several settings for each deck: FX 1 and FX2 Insert, Sync On, and Key On.

FX On / Hold

There are two On buttons for each FX units. The rst, FX ON, toggles the eects on and o. The sec-

1 2 ... 12 13 14 15 16 17 18 19

Sin comentarios

Electrix Tweaker Traktor Reference Manual de usuario Pagina 17